Scilab Home Page | Wiki | Bug Tracker | Forge | Mailing List Archives | Scilab Online Help | File Exchange
ATOMS : FOSSEE-Scilab-Octave-Toolbox details
Login with GitLab


This is a Scilab toolbox to call octave functions. It requires octave to be installed on the system.
(6164 downloads for this version - 12273 downloads for all versions)
Owner Organization
FOSSEE Toolbox
Creation Date
April 19, 2020
Source created on
Scilab 6.0.x
Binaries available on
Scilab 6.0.x:
Linux 64-bit
Install command
--> atomsInstall("FSOT")
             This is a Scilab toolbox to call octave functions. It requires octave to be
installed on the system. You will also need to install the required packages in
octave before you call them from this toolbox. This version on toolbox
supports only doubles as input and output, including complex numbers.

## This toolbox has been built and tested using 
1. OS - Linux Debian 10, Ubuntu 18.10, 19.10 (64-bit)
2. Octave - Version 4.4.1, 5.1.0
3. Scilab - Version 6.0.1, 6.0.2

## Software prerequisites:
Run the following commands in the linux terminal
1. sudo apt-get update
2. sudo apt-get install build-essential
3. sudo apt-get install liboctave-dev
4. sudo apt-get install octave
5. sudo apt-get install scilab

NOTE: Downloaded scilab binaries will not work with this toolbox due to fftw
library mismatch. Scilab HAS to be installed using "sudo apt-get install
scilab" command on the linux terminal.

## Install the required octave packages using the below command in linux
1. sudo apt-get install octave-<pkg name>
For example, to install signal package in octave, do
1. sudo apt-get install octave-signal

## Launch Scilab and run the following commands inside the scilab console
1. cd <path to fossee-scilab-octave-toolbox directory>
2. exec builder.sce
3. exec loader.sce
4. help octave_fun (then execute the examples appearing on the help page to
the toolbox)

## Building the source
In case if executing the builder and loader files in Scilab throw an error
regarding .so files, you probably need to build the toolbox libraries from
source. Do the following on the linux terminal
1. Download the fossee-scilab-octave-toolbox source from
2. Close Scilab, if running
3. cd fossee-scilab-octave-toolbox/src/
4. make clean
5. make
6. make install
Then build the Scilab toolbox       

Change log
Version 0.2 (April 19, 2020)
 -Fixed bug in start file
 -Toolbox cleanup
 -Reduced size of binary and source.

Version 0.1 (November 15, 2019)
 -Published the first release            
Files (2)
[757.50 kB]
Linux 64-bit binary for Scilab 6.0.x

[77.79 kB]
Source code archive

News (0)
Comments (0)
Leave a comment
You must register and log in before leaving a comment.
Login with GitLab
Email notifications
Send me email when this toolbox has changes, new files or a new release.
You must register and log in before setting up notifications.