Scilab JSON Toolbox
(17112 downloads, updated August 30, 2019)
A Simple JSON Toolbox for Scilab
4 comments
-
--> atomsInstall("json") |
Serial Communication Toolbox
(95720 downloads, updated May 2, 2023)
A toolbox for communication over a Serial Port in Scilab
58 comments
-
--> atomsInstall("serial") |
OpenRTDynamics Real-Time Framework
(8516 downloads, updated June 22, 2016)
OpenRTDynamics Toolbox for Scilab
2 comments
-
--> atomsInstall("OpenRTDynamics") |
serialport
(9607 downloads, updated June 22, 2016)
Binding to native posix serial port
--> atomsInstall("serialport") |
Xcos Parrot ARdrone toolbox
(9829 downloads, updated May 26, 2015)
Pilot Parrot ARdrone using Xcos blocks
--> atomsInstall("ardronemodule") |
Xcos Left Wave Denoise toolbox
(18218 downloads, updated June 22, 2016)
Denoise a real time signal using a wavelet filter
--> atomsInstall("leftwavedenoise") |
VISA Signal Acquisition and Instrument Control Toolbox
(25246 downloads, updated March 9, 2016)
Interface with National Instrument's Virtual Instrument Software Architecture (VISA)
46 comments
-
--> atomsInstall("visa") |
MicroDAQ Toolbox
(53508 downloads, updated October 22, 2019)
Toolbox for MicroDAQ real-time DSP control measurement system
4 comments
-
--> atomsInstall("microdaq") |
WG Serial Xcos IO Block
(34592 downloads, updated May 30, 2023)
Provides a generic Xcos block that allows to connect embedded hardware IOs to a Xcos simulation.
9 comments
-
--> atomsInstall("wgserialxcosio") |
Xcos STM32 toolbox
(13901 downloads, updated June 30, 2017)
Add STM32 peripherals blocks to the palette, Code Generation
10 comments
-
--> atomsInstall("xcos_stm32_toolbox") |
Scilab Code Generator
(32880 downloads, updated June 26, 2023)
Code generator for Xcos and Scilab
5 comments
--> atomsInstall("xcos_code_generator") |
Scilab Audio Module
(8519 downloads, updated November 6, 2019)
This module allows audio recording inside SCILAB.
--> atomsInstall("bytecode_audio") |
Remote Exec
(12068 downloads, updated July 11, 2022)
Implements remote command execution
--> atomsInstall("remote_exec") |