CPGE - Control systems for French preparatory classes

Comment from Belot Eric -- September 7, 2016, 10:36:13 AM    

Hello, 

I have installed the last version of this toolbox (v1.6.3) on Scilab 5.5.2 version and
have the following error message when toolbox is automatically load (in french):

Start CPGE - Xcos toolbox
	Load macros
	Load palette - CPGE - Standard blocks
atomsLoad : Une erreur est survenue au cours du chargement de 'CPGE-1.6.3':
	import_from_hdf5 : Version erronée du format de fichier SOD. Valeur maximum attendue :
2.
Trouvée : 3

Also I have created the .names file which is not present on the package.

What is the problem with the .SOD ?

Thanks in advance.

EB

Comment from Belot Eric -- September 7, 2016, 01:50:11 PM    

I found solution to this PB.
I have installed the 1.6.0 version compliant with Scilab 5.5.2
So, don't install the last version of this toolbox on the previous version of Scilab ...

Comment from Sébastien Celles -- October 22, 2018, 10:14:31 PM    

Hello,

At Scilab startup,


Initialisation :
  Chargement de l'environnement de travail

Start iodelay toolbox 
    Load macros
    Load help
    Load demos

Start CPGE - Xcos toolbox
    Load macros
    Load palette - CPGE - Standard blocks
    Load help
    Load demos
    CPGE Version: 1.6.0


is shown on Scilab console despite


    CPGE Version: 1.6.3

was installed

Similar issue occured both with Scilab 5.5.2 and 6.0.x

I hope you can fix that and keep CPGE module updated (especially for Scilab 6.0.x version)

Kind regards

Answer from Samuel Gougeon -- February 3, 2019, 04:14:59 PM    

Retranscrit à http://forge.scilab.org/index.php/p/cpge/issues/1814/
Merci

Comment from Samuel Gougeon -- April 8, 2019, 06:32:15 PM    

Yann,
The archive of source files for this 1.6.3 version is named cpge-1.6.2.tar.gz.
Is it really up-to-date? Can we start from it to prepare the next release 1.6.4,
or is the source code on the forge to be considered?
Thanks.
Regards
Samuel

Comment from Jonas Kipp -- May 17, 2019, 10:22:54 PM    

Hello,
I got a 'little' Problem.
I have a PID regulator for a DC motor and I would like to plot a Bode diagramm for exact
this. Transfer function works and the scope looks perfectly, but a Bode diagramm .. nope.
I tried to find some Tutorials on the www but the existing three doesn't help.
And my french is so baaad that I am totally overwhelmed.

So. Could one of you guys explain how it works ? In detail and for Idiots maybe, to clear
up misunderstandings.

At the moment I try to get it work with the two "GRANDEUR_PHYSIQUE". 
One in front of my regualtion and one at the end. 
Also I place the bode block somewhere and set block type at "1". 
And also I set the Scope to Time = 3s (in the scope themselve and under simulation ->
options). 
Scope looks fine. Everything ok. Bode Plot, doesn't work. Nothing happens.
Just [Error in post_xcos_simulate: ending simulation.] at the command window of SciLab.

I hope I could describe my problem good enough ..

Thx, and greetings from Germany. Berlin :D

Answer from reddy rohit -- May 25, 2020, 02:19:44 PM    

hello Jonas Kipp

i am getting the same error Error in post_xcos_simulate: ending simulation] and bode 
plot does not get plotted 
scilab version : 6.02

Is this problem resolved for you ?

Also i am not able to find  CGPE module for latest version 6.1

Any suggestion ?


Thanks
Rohit

Comment from Philippe Cuenot -- June 26, 2019, 07:34:48 PM    

Hello

I am using the ATOMS CPGE 1.6.3 with Scilab 5.5.2 on Windows 2012 Server to be able to
calibrate a PI control. When using the paramter block (with correct configuration)
simulation fails with the error message below.
Did anyone already meet this problem and found an a fix ?
Thanks for your help
Philippe

Warning !!!
Scilab has found a critical error (EXCEPTION_ACCESS_VIOLATION).
Save your data and restart Scilab.
 
 Une erreur s'est produite dans pre_xcos_simulate : Simulation annulée.   
 at line 311 of function scicos_simulate

Comment from Patrick Calmettes -- April 28, 2020, 06:41:25 PM    

Bonjour,

J'ai installé semble-t-il avec succès le module CPGE 1.6.3 pour Scilab 6.1.0 mais en 
essayant d'excuter les fichiers zcos précédemment créés avec Scilab 5.5.2, j'obtiens ce

type de message:

"Problème avec la taille ou le type de port"

qui concerne les blocs fonctionnels SCOPE provenant du module CPGE.

Quelqu'un aurait-il une idée sur la façon de résoudre ce problème?

Merci