You are here: home | NIDAQ | 0.3.2

NIDAQ

NI-DAQmx interface with Scilab

(7714 downloads for this version - 9406 downloads for all versions)

Details

Version

0.3.2

Authors

Dirk Reusch

Allan CORNET

Owner Organization

individual

Maintainer

Simon GARESTE

Category

Instruments Control

Website

http://forge.scilab.org/index.php/p/nidaq/

License

GPL (3.0)

Creation Date

November 23, 2012

Source created on

Scilab 5.4.x

Binaries available on

Scilab 5.4.x:

Windows 32-bit

Windows 64-bit

Install command

--> atomsInstall("NIDAQ")

Report a bug

GitLab's issues for NIDAQ

Description

            Connect Scilab to NI Instrumentation Device
 
NIDAQ module:
* Easily configuration of the instrumentation device and read data in Scilab for
immediate analysis.
* Send data over analog and digital output channels provided by the
instrumentation device
* Functions provided to control analog input and output, counter/timer and
digital I/O DAQ device (National Instruments)

based on DAQ Toolbox for Scilab 4.x (http://www.kybdr.de/software) modified
for Scilab 5.3 and ATOMS support

version 0.3.2:
- Same sources as 0.3.1, but makes package available for Scilab 5.4

version 0.3.1:
- Same sources as 0.3, but makes it available for Scilab 5.4

version 0.3:

- Scilab 5.3 support (ATOMS format)
- Support NI-DAQmx 9.4.x (http://joule.ni.com/nidu/cds/view/p/id/2604/lang/fr)
- Add DAQ_SystemInfoAttribute function
- 64 bit support for Windows


NIDAQ functions: 
DAQ_Channel_Configuration_and_Creation — DAQ_CreateCOPulseChanFreq 
DAQ_Constants — DAQ 
DAQ_Error_Handling — DAQ_GetExtendedErrorInfo 
DAQ_Read_Functions — DAQ_ReadCounterU32 
DAQ_SystemInfoAttribute — Get some system informations 
DAQ_Task_Configuration_and_Control — DAQ_ResetDevice 
DAQ_Timing — DAQ_CfgImplicitTiming 
DAQ_Triggering — DAQ_CfgAnlgEdgeRefTrig 
DAQ_Write_Functions — DAQ_WriteDigitalScalarU32

Files (3)

[144.33 kB]

NIDAQ-0.3.2-1-src.zip

Source code archive

Upload date : 2012-11-23 15:26:30
MD5         : 992a74dc224131efbcf69fbbd048ab99
SHA1        : 5ba63ee7fcf8d5aac1ba497c4a59304759f71e19
Downloads   : 1434
 File list

[84.13 kB]

NIDAQ_0.3.2-1.bin.windows.zip

Windows 32-bit binary for Scilab 5.4.x

Windows 32-bit
Automatically generated by the ATOMS compilation chain

Upload date : 2012-11-23 15:30:01
MD5         : a1221b632dcacc199f92c5f50e443795
SHA1        : c160c59a9679d54373a4786cca1eee03928f1164
Downloads   : 2374
 File list

[87.12 kB]

NIDAQ_0.3.2-1.bin.x64.windows.zip

Windows 64-bit binary for Scilab 5.4.x

Windows 64-bit
Automatically generated by the ATOMS compilation chain

Upload date : 2012-11-23 16:29:02
MD5         : d5098bafd3366345975bf63890fb5cd7
SHA1        : b1bfbf5946385ce809d9fce3f8b6d5cec91743af
Downloads   : 3906
 File list

News (0)

Comments (4) ↑ Leave a comment

Comment from Arie Sheinker -- February 29, 2016, 01:38:32 PM

Hi,
I am a new user of Scilab, and I would like to use the NIDAQ toolbox.
Where can I find a good explanation on how to install the NIDAQ toolbox?
using atomsInstall('NIDAQ') and other options that I found in the internet results in 
Error 10000.
Best,
Arie

Comment from Benoit VIALLET -- May 18, 2017, 05:28:40 PM

This comment has been deleted.

Comment from Benoit VIALLET -- May 18, 2017, 06:00:30 PM

Hello,

I installed the toolbox NIDAQ_0.3.2-1.bin.x64.windows under Win7 64bit and Scilab 6. I get
the following message
when starting the toolbox:

Start NIDAQ
	Load macros
atomsLoad : Une erreur est survenue au cours du chargement de 'NIDAQ-0.3.2':
	lib : D:\Users\XXXXXX\AppData\Roaming\Scilab\scilab-6.0.0\atoms\x64\NIDAQ\0.3.2\macros\
n'est pas un chemin de librairie valide.

But the path is correct. 

Loading with this method and similar path is OK with scilab 5.5 and loading with scilab
6.0 other toolbox is correct also.

Any advice?

Thanks Benoit

Answer from TE Az -- August 2, 2017, 01:16:02 PM

> Hello,
> 
> I installed the toolbox NIDAQ_0.3.2-1.bin.x64.windows under Win7 64bit and Scilab 
6. I
> get
> the following message
> when starting the toolbox:
> 
> Start NIDAQ
> 	Load macros
> atomsLoad : Une erreur est survenue au cours du chargement de 'NIDAQ-0.3.2':
> 	lib :
> D:\Users\XXXXXX\AppData\Roaming\Scilab\scilab-6.0.0\atoms\x64\NIDAQ\0.3.2\macros\
> n'est pas un chemin de librairie valide.
> 
> But the path is correct. 
> 
> Loading with this method and similar path is OK with scilab 5.5 and loading with 
scilab
> 6.0 other toolbox is correct also.
> 
> Any advice?
> 
> Thanks Benoit

Hello, 
I have similar problem but with another toolbox IPD.
-------------------
Start IPD - Image Processing Design
	Load macros
à la ligne    21 de la fonction startModule ( C:\Program Files (x86)\scilab-
6.0.0\contrib\IPD\etc\IPD.start ligne 38 )
à la ligne   127 du fichier exécuté C:\Program Files (x86)\scilab-
6.0.0\contrib\IPD\etc\IPD.start
à la ligne    10 du fichier exécuté C:\Program Files (x86)\scilab-
6.0.0\contrib\IPD\loader.sce

lib : C:\PROGRA~2\SCILAB~1.0\contrib\IPD\macros\ n'est pas un chemin de librairie 
valide.
----------------------------
I launch IPD directy from loader.sce
Is there a solution for this problem ?

Thank you for your help

Comment from Jesus Torres -- April 19, 2018, 11:22:18 PM

I am using successfully a USB 4432 device through this Scilab package. However, I need more

functions than the included in the package (e.g. DAQmxCreateAIAccelChan). How can I adding

more functions to the package for Scilab? I simply tried adding the function in the gateway

but it was not enough.